Product/Service

Fieldbus to Current Converter

Source: Smar International Corp

Fieldbus to Current Converter
The FI302 converter from Smar International converts a fieldbus signal into a 4 to 20 mA signal
Request Information

Now exhibiting at the Texas A&M Instrumentation Symposium

The FI302 converter from Smar International converts a fieldbus signal into a 4 to 20 mA signal. The fieldbus signal can, for example, be a request from the bus to a frequency converter to set a conveyor speed to 3.4 feet per second. If the frequency converter does not have fieldbus capability, the bus signal can be converted into a conventional 4 to 20 mA by the FI302.

This instrument has three independent channels, which means that three 4 to 20 mA outputs are available. The FI302 incorporates PID control, linearization, damping, local display, local adjustment and master capability. It features open loop detection. Configuration is achieved by local adjustment or via fieldbus communication.

Smar International Corporation, Northwest Point Service Center, 7240 Brittmoore, Suite 118, Houston, TX 77041. Tel: 1-713-849-2021; Fax: 1-713-849-2022.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information