Industrial Cleaning Agents

Vapor Tech manufactures industrial strength cleaning and stripping agents for many hard-to-clean substances. Most of our cleaning agents are non-hazardous and environmentally friendly.

VT-SUDZ
Water-based degreaser.

• Dilutes with water.
  
• Cuts light oils and greases with ease.
  
• Non-hazardous, non-flammable product.

ALKYL-LITE 400
Highly alkaline, water-based cleaning agent.

• Contains sodium hydroxide, powerful detergents, and special coupling agents.
  
• Contains fresh scent.
  
• Not suitable for soft metals.
  
• Corrosive.

CON-CLEAN
Industrial-strength concrete and floor cleaner.

• Penetrates deep into concrete to remove oils and other substances.
  
• Contains detergents, solvents, and other ingredients that literally pull residues out of concrete pores.
  
• Dilutes with water.

PCB-LITE
Water-based chemical for the removal of PCBs and other solvents.

• Powerful blend of ingredients strip PCBs from metal surfaces.
  
• Soaking overnight enhances stripping and removal.
  
• Also used to lower color values for tank walls.
  
• Deeply penetrates walls to pull out chemicals.
  
• Corrosive.

PHOS-CLEAN
Water-based chemical that penetrates deeply into metal pores to remove residues.

• Contains acids, solvents, and detergents.
  
• Reduces the need to steam tanks for long periods of time.
  
• Lowers color values from tank walls by removing tough residues.
  
• Ideal for use in tanks and product transfer lines

PEELOLINE
Solvent-based chemical cleaning and stripping agent.

• 100 percent biodegradable.
  
• Contains natural terpene solvents.
  
• Has a pleasant orange odor.
  
• Cuts tar, sludge, heavy lube oils, latex, creosote, sealants, and some resins.
  
• Combustible liquid.

VT600 STRIPPER
Replacement product for 1,1,1 Trichloroethane. Solvent-based product that removes many tough synthetic residues with ease.

• Melts many products on contact, including many resins.
  
• High flash point.
  
• Non-hazardous.

BI-SOLV
Solvent-based cleaning agent for synthetic resins and plastic. This product is a replacement for 1,1,1 Trichloroethane.

• Strips polysulfide sealants, many resins such as EPON, can coatings, heavy waxes, and many more hard-to-remove products.
  
• Combustible product.

TRI-SOLV
Blended solvent material containing three very strong stripping agents.

• Used for resins and heavy oil products that may be partially 'set-up'.
  
• Very vigorous on plastics and resins.
  
• Similar to our BI-SOLV product, but more powerful and versatile.
  
• Combustible.

VT100
Blended solvent containing glycols and paraffinic solvents.

• Cuts many hydrocarbon sludges, oils, and residues.
  
• Combustible liquid.

VT110
Blended solvent containing aromatics, glycols, isoparaffinic solvents, and esters.

• Cuts hydrocarbons, oils, lube oil additives, and more.
  
• Combustible!

HYDROLITE 150 CUTTER SOLVENT
Solvent-based blended aromatic chemical.

• Economically priced.
  
• Contains powerful solvents that work without heat to remove stubborn substances such as oils, tars, hydrocarbons, and other products.
  
• Combustible.

Vapor Tech, 957 Nasa Road One, Suite 110, Houston, TX 77058. Tel: 281-488-8389; Fax: 781-823-2561.