Product/Service

Hairpin Heat Exchangers

Source: Brown Fintube Company

Hairpin Heat Exchangers
Based on modular principles, individual hairpin sections are arranged in proper series, parallel, or series-parallel combinations to achieve the required duty.
Based on modular principles, individual hairpin sections are arranged in proper series, parallel, or series-parallel combinations to achieve the required duty. When duties change, sections are added, subtracted, or rearranged to meet the new requirements.
Double-Pipe Hairpin Sections
Available in both finned and bare tube designs. Shell sizes range from 2" to 8" IPS. Applications: ideal for all severe operating conditions. A section is also available for standard petroleum, petrochemical or chemical service.
Multi-Tube Hairpin Sections
Available in finned, Twisted-Tube, and bare tube designs. Shell sizes range from 3" to 30" IPS. Applications: Designs are available to meet most heat exchanger requirements; from heating heavy oils and asphalts to light chemicals, gasoline, butanes, and other hydrocarbons. Also available are designs for high-pressure-gas heat transfer and for processing lethal or hard-to-contain fluids and gases such as hydrogen, Dowtherm® and acids.
High Pressure Sections
Available in Double Pipe and Multi-Tube Hairpin designs. Shell sizes range from 2" to 30" IPS. Applications: High Pressure tubeside to 15,000 PSIG design pressure.

Brown Fintube 12602 FM 529 Houston, TX 77041. Tel:713-466-3535. Fax 713-466-3701.