ARC S1
ARC S1 Datasheet
ARC General Line Brochure
ARC MCS Product Selector
An advanced composite formulated to protect metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. Colors are Light Gray and Blue.
ARC S1 is a low viscosity high performance composite lining that is designed to be spray applied but may also be applied by roller or brush. As a one coat system, it functions as a corrosion resistant primer for many high performance coatings. ARC S1 yields excellent barrier properties for long-term corrosion and chemical resistance in immersion exposures when used in a multicoat application. The cured ARC S1 provides a high gloss surface with unrivaled adhesion and resistance to corrosion.
COMPOSITION - Polymer/ Surface Modified Mineral Composite
Matrix - A two component, modified epoxy resin structure reacted with a polyamidoamine curing agent.
Reinforcement - A proprietary blend of surface modified mineral reinforcements designed to provide resistance to permeation, chemical attack and corrosion.
Coverage
Based on a 250 µ (10 mils) thickness:
4 liters will cover 16 sq. meters (170 sq. ft.)
16 liters will cover 64 sq. meters (678 sq. ft.)
To calculate the kilograms required for a given application use the appropriate formula below:
1.5 (g/cc) x Area (m2)x Average Thickness (mm) = kg
3.5 x Area (ft2) x Average Thickness (inches) = kg
Chemical Resistance
Recommended for exposure to low concentrations of acids, alkalies, bleaches, and other chemicals. Please refer to the ARC Chemical Resistance Charts for a comprehensive list of chemicals and associated exposure ratings at ambient temperature. Post curing will improve chemical resistance; contact ARC Technical Services for elevated temperature exposure.
Suggested Uses
- Chemical Storage Tanks
- Structural Steel
- Pipeline Coatings
- Clarifier Tanks
- Petroleum Storage Tanks
- Cooling Water Systems
- Service Water Systems
- Thickener Tanks
Benefits
- Dramatically outlasts conventional paints and coatings.
- Long pot life allows for ease of use.
- 100% solids, no shrinkage on cure.
- Outstanding adhesion insures reliable performance against under film corrosion.
- Able to be high voltage spark tested for pinhole free films.
Packaging
Material is available in two sizes: 4 and 16 liter kits. Each package contains two pre-measured containers (Part A and Part B). A mixing tool, brush and instructions for use are enclosed with the 4 liter kit. The 16 liter kit contains only application instructions.
ARC S1 Datasheet
ARC General Line Brochure
ARC MCS Product Selector