Product/Service

Differential Pressure Transmitters

Source: Dwyer Instruments, Inc.

Differential Pressure Transmitters
The Series 616W Differential Pressure Transmitters are available in an expanded line of 34 models, half of them with LCD readouts for on-site troubleshooting, and covering factory-calibrated ranges down to 0-2 in. w.c. and up to 0-100 psid.
Request Information
The Series 616W Differential Pressure Transmitters are available in an expanded line of 34 models, half of them with LCD readouts for on-site troubleshooting, and covering factory-calibrated ranges down to 0-2 in. w.c. and up to 0-100 psid. These CE-approved units, which sense the pressure of air or compatible gases with ± 0.5% F.S.O. accuracy, are enclosed in weatherproof, polycarbonate cases, rated IP66/NEMA 4X.

Versatility is inherent in the circuit design for these transmitters, allowing for operation in 2, 3, or 4-wire loops. Their 4-20 mA output signal supports simultaneous operation of a variety of devices, such as an analog panel meter, a chart recorder, or process controlling equipment.

Easy to install, these transmitters have barbed, dual-sized pressure connections to accommodate either 1/8 in. or 3/16 in. (3.2 mm or 4.8 mm) I.D. rubber or vinyl tubing.

Dwyer Instruments, Inc., P.O. Box 373, Michigan City, IN 46361. Tel: 219-879-8000. Fax: 219-872-9057.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information