Flow Field Units TM10, DP20
Whether your flow application is gas or liquid, Accutech field units provide a selection of options for measuring volumetric flow rate and totalised volume.
Click Here To Download:
•Datasheet: Accutech TM10 Wireless Turbine Meter Totalizer
•Datasheet: Accutech DP20 Wireless Differential Pressure Field Unit
•Accutech Wireless Instrument Series Brochure
•Telemetry & Remote SCADA Solutions Line Card - General
•Telemetry & Remote SCADA Solutions Line Card - Oil & Gas
•Telemetry & Remote SCADA Solutions Brochure
Whether your flow application is gas or liquid, Accutech field units provide a selection of options for measuring volumetric flow rate and totalised volume.
The DP20 Differential Pressure field unit may be operated in one of four modes: Differential Pressure, Orifice Flow, Open Channel Flow and Level. The product also has a square root function for use with orifice plates, v-cones, and pitot tubes, providing volumetric flow measurement. In Orifice Flow mode, differential pressure may be measured in a variety of ranges from /-100 inches to /- 700 inches water to 300 psi.
Open channel flow may be measured from liquid levels using the DP20 in Open Channel Mode and configured with a K factor to report directly in units of flow. Channels with irregular dimensions can be accommodated using an additional 22-point custom curve.
The highly accurate TM10 Turbine Meter Totaliser field unit accepts low-voltage pulses generated by most turbine meters (turbine meter not included) and calculates instantaneous flow rate and totalised flow volume of liquids and gases, based on the pulse frequency, 1Hz to 10kHz, and user-configured ‘K’ factor.