SPECTRALINE Inc. announces the release of the ES100 Spectrometer with a continuous full spectra acquisition rate of 1320 Hz, and a single shot rate of 7 KHz. With this latest addition, full hyper spectral imaging of a 120 x 120 image can be obtained in as little as 11 seconds.
The primary advantage of the ES100 Hyper Spectral Imager over conventional hyper spectral imagers is that
Hyper spectral imagers are most frequently used for
The ES100 Spectrometer is converted to a hyper spectral imager with a 2D scanner mounter in front of it. The hyper spectral imager obtains spectral data at 160 wavelengths (between 1.2 and 4.8 microns) with an image resolution of 120 x 120 pixels.
The technical specifications of the ES100 and the 2-D scanner are given below.
ES 100 SPECIFICATIONS:
Array: 160 element bilinear PbSe
Spectra acquisition rate: 1320 Hz
Wavelength: 1200 nm to 4800 nm
Data Acquisition: Desktop computer with NI 10 MHz PCI board
User Interface: Infraspec GUI with scanner module
2-D SCANNER SPECIFICATIONS:
Resolution: 120 x 120 points
Horizontal line rate: 11 Hz
Hyper spectral frame rate: 0.091 Hz
Scanner type: Galvo type
Imaging lens: FOV Variable
Spectraline, Inc., 1291 A, Cumberland Avenue, West Lafayette, IN 47906. Tel: 765-497-2993 ; Fax: 765-463-7004.