Product/Service

On-Site Oxygen and Nitrogen Generators

Source: Italfilo Engineering s.r.l.

On-Site Oxygen and Nitrogen Generators
N-Series Nitrogen Generators and T-Series Oxygen Generators offer numerous advantages over cylinder or pipeline-delivered nitrogen: very low gas cost, total autonomy and independence from traditional gas suppliers, and safety due to low gas pressures.
N-Series Nitrogen Generators and T-Series Oxygen Generators offer numerous advantages over cylinder or pipeline-delivered nitrogen: very low gas cost, total autonomy and independence from traditional gas suppliers, and safety due to low gas pressures.

To ensure the reliable running of unattended gas production process, each on-site system is equipped with the GasTronic, a PC-based PLC controller unit that continuously detects and computes main process data, including: oxygen percentage (by means of integrated oxide zirconium cell); air and gas temperature; gas pressure; and product gas flow (constantly compensated with temperature and pressure readings). Such parameters are shown in real time on the LCD control panel together with other parameters.

All parameters are at the user's fingertips on the GasTronic panel. AN interactive telemetry control system is available as an option.

The technologies offered by the company are: PSA system for oxygen generators and PSA or membrane system for nitrogen. The outputs of oxygen generators are from 0.5 to 100 Nm3/h (20-3,800 scfh), while for nitrogen the outputs are from 0.5 up to 3,500 Nm3/h (20-134,000 scfh).

Italfilo Engineering s.r.l., Via Giordania, 48, Grosseto, , IT, I-58100. Tel: +39 0564 458041; Fax: +39 0564 458043.