Product Showcase

  1. ASME Code USF & USB Housings
    8/9/2019

    Shelco Filter’s USB and USF filter housings are ASME Code certified. This new certification allows for worldwide distribution and follows globally accepted engineering standards, which ensures integrity, quality and durability in production and performance. 304L or 316L stainless steel filter housings provide maximum durability, and are available in a variety of sizes, construction materials, gaskets, or with custom features. The Housings have swing bolt closures for easy cartridge change-outs and secure sealing and holds four (4) to fifty-two (52) cartridges to serve a wide range of flow rates. Shelco’s heavy-duty ASME Code cartridge housings are designed for commercial and industrial filter applications.

  2. Optical Gas Imaging Camera: FLIR GF620
    5/9/2019

    The FLIR GF620 is an optical imaging camera designed to detect and visualize methane and other volatile organic compounds. This high-resolution, high-sensitivity camera features a 640 x 480 IR detector. It is also the first FLIR OGI camera to offer Quantification mode (Q-mode) for streamlined set-up of the optional QL320 gas quantification system.

  3. Siemens’ Revive™ Oily Water Membrane Systems
    7/26/2018

    Siemens’ Revive™ oily water membrane systems replace both filtration and flotation with a single step, eliminating the need for polymers and allowing for better oil recovery. Revive™ systems can achieve Oil & Grease and Total Suspended Solids levels of <1 mg/L, and Silt Density Index of <3.

  4. PerforMedia™ Oil Removal Media
    7/26/2018

    Oily water filtration was developed for filtering free oil and suspended solids from produced water or refinery wastewater, to be disposed of, re-injected, discharged or reused. These systems primarily used black walnut shell media, and required expensive treatment upstream to limit the filter loading rate.

  5. Quantitative Optical Gas Imaging (qOGI) Technology With FLIR GF-Series Cameras: QL320™
    11/30/2017

    The QL320™ is a system designed with Providence Photonics’ new Quantitative Optical Gas Imaging (qOGI) technology that works solely with FLIR GFx320 or FLIR GF320 cameras. With this partnership, surveyors can measure mass leak rates or volumetric leak rates for most hydrocarbons. With usage capabilities at a variety of distances, operators can monitor hard to reach areas and storage tanks from a safe location.

  6. Thermal Imaging Camera For Continuous Gas Leak Detection: FLIR A6604
    11/8/2017

    The FLIR A6604 optical gas infrared imaging camera is designed for continuously scanning installations in remote areas or zones that are difficult to access. These cameras are widely used in industrial settings, such as oil refineries, natural gas processing plants, offshore platforms, chemical/petrochemical complexes, and biogas, and power generation plants. They are also able to detect harmful greenhouse gases that can seriously harm the environment.

  7. Optical Gas Imaging Camera For Continuous Gas Leak Detection: G300 a
    11/8/2017

    The FLIR G300 a optical gas infrared imaging camera is designed for continuously scanning installations in remote areas or zones that are difficult to access. These cameras are widely used in industrial settings, such as oil refineries, natural gas processing plants, offshore platforms, chemical/petrochemical complexes, and biogas, and power generation plants.

  8. Infrared Camera For CO2 Leak Detection: FLIR GF343
    11/7/2017

    The GF343 is an infrared optical gas imaging camera designed to quickly and easily detect CO2 leaks from a safe distance. This non-contact CO2 detection technology helps prevent unplanned outages by permitting the inspection of equipment while it is still online in the course of normal operations.

  9. Infrared Camera For SF6 Detection And Electrical Inspections: FLIR GF306
    11/6/2017

    FLIR offers the GF306 optical gas imaging camera designed to visualize and pinpoint SF6 and other gas emissions without the need to shut down operations. With the ability to quickly scan wide areas for leaks at safe distances, these cameras enable quicker repairs, and reduce revenue costs and safety concerns involved with gas-insulated substation and circuit breakers.

  10. Infrared Cameras For Gas Leak Detection And Electrical Inspections: FLIR GF300/GF320
    11/6/2017

    The FLIR GF300/GF320 cameras are designed for the detection of methane and Volatile Organic Compound (VOC) fugitive emissions that come from the production, transportation, and use of oil and natural gas. These cameras operate by scanning large-scale areas and visualize potential gas leaks in real-time. They are ideal for monitoring plants that are difficult to reach with contact measurement tools.