Product Showcase

  1. Folded Flow® Dissolved Air Flotation Separator
    2/29/2016

    The Folded Flow® DAF system’s simple and innovative design “folds” the flow by removing effluent from the same end of the tank as the influent is introduced, resulting in a higher hydraulic loading rate.

  2. Corrugated Plate Separators (CPS)
    2/29/2016

    Corrugated Plate Separators (CPS’s) provide economical and effective removal of oil and solids from wastewater by gravity, in a smooth, efficient automatic flow. With thousands of installations in operation, this proven design has no moving parts and provides consistent operating results for simple and better separation.

  3. GAA630-M Emission Monitoring System
    1/26/2016

    The GAA630-M is based on a dry and extractive approach. The system is designed as a two housing solution. The continuous gas analyzers are engineered to fit in a small footprint IP65 compact cabinet, while the sampling system is mounted in a separate IP65 enclosure. The design complies to IMO MARPOL ANNEX 14 Res. MEPC 177 (58) (NTC) & IMO MARPOL ANNEX 9 Res. MEPC 184 (59). The sampling system is based on a continuous extraction cooling device, removing the moisture from the sample gas. Both cabinets are equipped with antivibration devices to reduce vibrations effects, maximize measuring performance and extend lifetime of the analytical and pneumatic components

  4. GAA330-M Emission Monitoring System
    1/26/2016

    The GAA330-M is a CEM system designed to measure the gas pollutants SO2, CO2, and NOX, as specified in MARPOL Annex VI. The GAA330-M operates with both high- and low-sulfur fuels, no matter if you are operating outside or inside an ECA. ABB has the right gas analyzer portfolio to allow vessels to stay compliant with current and upcoming regulations. The GAA330-M uses an Infrared photometer for reporting the SO2/CO2 ratio as specified by MARPOL requirements. NOX is monitored with an ultraviolet photometer (UV) which is the most practical approach. ABB photometers are manufactured and designed for best performance under harshest conditions with an installed base of more than 100.000 units in global industries.

  5. HP30 Process Hydrogen Analyzer
    1/11/2016

    The HP30 Process Hydrogen Analyzer is intended for installation and use in refinery and petrochemical plant environments for the monitoring of hydrogen recycle and hydrogen make-up process streams.

  6. TALYS ASP400 Series Analyzer
    11/12/2015

    The TALYS ASP400 series analyzer is designed to achieve monitoring and control of continuous processes. Its seamless installation enables real-time process monitoring, determination of stream properties or physical qualities, process characterization and early troubleshooting.

  7. Electromagnetic Flowmeter ProcessMaster FEP300
    7/15/2015

    The modular design of the ProcessMaster FEP300 standard version offers the industry's widest range of liners electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas, pulp & paper and metals & mining.

  8. Electromagnetic Flowmeter ProcessMaster FEP500
    7/15/2015

    The modular design of the ProcessMaster FEP500 enhanced version offers the industry's widest range of liners electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas, pulp & paper and metals & mining.

  9. CT5400 Process Gas Analyzer
    7/7/2015

    Cascade’s CT5400 is a multicomponent QCL, TDL analyzer for laboratory and process analytics. This product represents the next generation of gas analyzers and sensors, with the ability to measure up to 20 gases and an interchangeable modular configuration for up to 9 lasers. An embedded ARM processor gives fully autonomous intelligent operation. The CT5400 is Cascade’s most powerful analyzer to date.

  10. CT4000 OEM Gas Analyzer
    7/6/2015

    Cascade’s CT4000 system monitors in real time NO, NO2, SO2, CH4, H2O, CO and CO2 levels in ambient environments of up to 70 °C and gas temperatures of 190 °C. Applications for this system include ship emissions monitoring, power plant emissions monitoring, engine management, engine combustion tools, engine health management and carbon trading.