Downloads

  1. Water Solutions Brochure
    2/9/2016

    Water is a resource and a byproduct of all that we do, a critical element in offshore, onshore, upstream and downstream activities. The treatment and management of this water is becoming increasingly complex as you work to keep pace with global standards, energy demand and environmental regulations.

  2. FCI MT Series
    2/8/2016

    FCI’s MT Series Multipoint Mass Flowmeters are ideal for today's most challenging industrial air or gas handling applications and continuous emissions monitoring systems (CEMS)

  3. Air / Gas Mass Flow Meter Improves Wastewater Treatment Processing Efficiency
    2/3/2016

    One of the most common processes in wastewater treatment is the activated sludge method, which biologically treats the wastewater through the use of large aeration basins. This process requires the pumping of compressed air into the aeration basins where a diffuser system ensures the air is distributed evenly for optimum treatment. The energy needed to provide compressed air is a significant cost in the operation of a wastewater treatment plant.

  4. Endura Series Combustion Gas Analyzers
    1/28/2016

    Re-engineered and taken back to technical fundamentals, the Endura AZ Range saves you time, money and disruption. From rugged enclosure design, self-diagnostic electronics and auto calibration, to common component advantages combined with proven, innovatively applied technologies, the result delivers solutions that are easy to specify, install, configure, maintain and use.

  5. GAA630-M Emission Monitoring System
    1/26/2016

    The GAA630-M is based on a dry and extractive approach. The system is designed as a two housing solution. The continuous gas analyzers are engineered to fit in a small footprint IP65 compact cabinet, while the sampling system is mounted in a separate IP65 enclosure. The design complies to IMO MARPOL ANNEX 14 Res. MEPC 177 (58) (NTC) & IMO MARPOL ANNEX 9 Res. MEPC 184 (59). The sampling system is based on a continuous extraction cooling device, removing the moisture from the sample gas. Both cabinets are equipped with antivibration devices to reduce vibrations effects, maximize measuring performance and extend lifetime of the analytical and pneumatic components

  6. GAA630-M Emission Monitoring System Datasheet
    1/26/2016

    We are on your wavelength - GAA630-M is an advanced CEM system solution for continuous gas analysis on board of vessels, specifically designed, certified and type approved for maritime installations. The GAA630-M system includes all necessary components, such as gas sampling probe, heated sample lines and sample conditioning.

  7. GAA330-M Emission Monitoring System
    1/26/2016

    The GAA330-M is a CEM system designed to measure the gas pollutants SO2, CO2, and NOX, as specified in MARPOL Annex VI. The GAA330-M operates with both high- and low-sulfur fuels, no matter if you are operating outside or inside an ECA. ABB has the right gas analyzer portfolio to allow vessels to stay compliant with current and upcoming regulations. The GAA330-M uses an Infrared photometer for reporting the SO2/CO2 ratio as specified by MARPOL requirements. NOX is monitored with an ultraviolet photometer (UV) which is the most practical approach. ABB photometers are manufactured and designed for best performance under harshest conditions with an installed base of more than 100.000 units in global industries.

  8. GAA330-M Emission Monitoring System Datasheet
    1/26/2016

    The GAA330-M is a CEM system designed to measure the gas pollutants SO2, CO2, and NOX, as specified in MARPOL Annex VI. The GAA330-M operates with both high- and low-sulfur fuels, no matter if you are operating outside or inside an ECA. ABB has the right gas analyzer portfolio to allow vessels to stay compliant with current and upcoming regulations.

  9. HP30 Process Hydrogen Analyzer Brochure
    1/11/2016

    A Robust Hydrogen analyzer package for refinery and petrochemical plants.

  10. HP30 Process Hydrogen Analyzer Datasheet
    1/11/2016

    A refinery unit uses upwards of 25 tons of hydrogen per day. The ABB HP30 on-line hydrogen analyzer will pay for itself by improving hydrogen management.